The MAINSSERVER HYBRID features:

- A unique embedded powerline noise suppression filter.

- A high continuous current capacity and a maximum transparency with regards to instantaneously drawn current surges.

- Strong shielding against in and outwards radiation of electromagnetic and radio frequency interference.

- Conductors and shield are of the high quality also found in our loudspeaker cables.

- Extreme ruggedness and therefore a very long lifespan.

An important feature of The MAINSSERVER HYBRID are its carefully designed powerline noise suppression properties:

- First of all The MAINSSERVER HYBRID’s special Hybrid conductor structure and configuration have been designed to work as an embedded powerline filter. This unique built-in filter effectively suppresses high frequency powerline noise (*1) without imposing any current delivery limitations: Unlike conventional powerline filters, The MAINSSERVER HYBRID does not employ any filtering components in series with its AC current path; Series impedance (reactance) is absent and the cable therefore does not exhibit any current limiting, resonance or sluggish response to current demand effects. A true unlimited stream of clean mains power indeed!

Secondly, the cable is provided with a high-quality shielding. This heavy shielding has two important functions: 

1. It keeps powerline noise from radiating outwards onto your close by equipment and interconnects.

2. It keeps external electromagnetic and radio frequency interference from entering the AC line.

- Third, the cable’s central yellow-green coloured ground lead features a broadband low impedance, which allows for perfect drainage of the connected equipment’s ground current noise and thus further helps to keep the noise floor down.

In transporting AC power as well as cleaning and protecting it from high frequency noise, The MAINSSERVER HYBRID is a unique multifunctional product. The MAINSSERVER HYBRID can be looked upon as a gatekeeper, physically separating the noise contaminated mains from your equipment’s interconnect and power wiring without imposing any current delivery limitations.

The MAINSSTREAM HYBRID is equipped with thick, high-purity, dense, silver-plated, oxygen-free, stranded copper conductors (quite a mouthful). The effective cross-section of the blue neutral wire and brown wire/live wire (*2) of the MAINSSTREAM HYBRID is each 1.69 mm² (~ AWG 15), resulting in a very low series resistance of 1.0 Ohm/100 m. The loop current series resistance of the cable is therefore a very low 0.02 Ohm per meter. The combined contact resistance of connected common mains and IEC plugs is often higher; therefore, the use of high-quality plugs, sockets, power inputs and further mains wiring is important. 

The 1.69 mm² power connections (*2) of the MAINSSTREAM HYBRID allow a continuous operating current of more than 16 amps in accordance with the international standard IEC publication 335-1, which at 230 V AC is equivalent to a continuous power of 3.7 kilowatts.

With its gold-coloured, heavy HULLIFLEX® 4 sheath and the heavy shielding underneath, the MAINSSTREAM HYBRID is extremely robust. The clean, dense, silver-coated, stranded shielding and inner conductors of the MAINSSTREAM HYBRID, as well as the HULLIFLEX® 4 polymer insulation material used throughout, also provide optimum protection against chemical (corrosive) attack from outside and guarantee a very long service life.

With all features on board for an uncompromised and long lasting performance, The MAINSSERVER HYBRID is the ultimate choice for the critical audiophile and professional.